The 515 is a rectangular, stationary speaker cabinet that pairs well cosmetically and electrically with the Leslie 715. It is an 11-pin interface. These units feature a stereo set-up (two amplifiers that each drive one of the 6×9 oval speakers behind the grilles) and a 3-way tone color switch that… full details here
Another pile of misc. Leslie parts, use with your 122, 145, 147, 142, 31H, 770, 125, 910, etc. Leslie speakers. There’s a large fast motor with the “1970s” style mount plate, many plugs and sockets, wiring with terminals, a bass rotor belt, a green-ish thin belt, mount brackets, wingnuts, a spindle… full details here
You are bidding on a used Vibrato Scanner for Hammond M, M2, M3 and M100 Organs
This is a pull from an operational M-102, circa 1963
Long leads – desoldered as necessary for removal.
This scanner is in working order now but, due to the zinc-dendrite… full details here
LESLIE HAMMOND CONNECTOR KIT#012617 (SAME AS 26-1) FOR HOOKUPOF A HAMMOND M3, M100, A100 TOA LESLIE 145, 1475 PIN PLUG FOR HOOKUP HARNESSINCLUDEDInternational bidders welcome… full details here
Nice little B3 emulator box with very “playable” drawbars. Cool for noise and drones via the crazy effects chain of your choice. B3 experts will not find the “Intersound” Leslie emulation very convincing. Unit ships with blue bag pictured, it’s been a decent lightweight gigbag. Viscount also made a white version… full details here
LESLIE HAMMOND TREMELO SWITCHNO MOUNTING TABBOLTS THROUGH FRONTCAN BE MOUNTED UNDER COVERON INSIDE OF ORGAN BY CHEEK BLOCKNO PLUGInternational bidders welcome… full details here
You are bidding on a used Start Motor for Hammond Tone Generators
To my knowledge, this fits BV, CV, B2, C2, B3, C3, A-100, D-100, M100 M, M2, M3, RT2, RT3however, I leave it to bidders to determine if this item is correct for your application.Please see representative photo of the… full details here
You are bidding on a used Matching Transformer for Hammond M-2 organs. It is in working order.
Long leads - desoldered where necessary for removal from tablets and drawbars.
Please see photo of the item you are bidding on.I do not accept returns unless I grossly misrepresent an item.So, if… full details here
The 540 is a beveled-end stationary speaker cabinet that pairs well cosmetically and electrically with the Leslie 720. It is an 11-pin interface. These units feature a stereo set-up (two amplifiers that each drive one of the 6×9 oval speakers behind the grilles) and a 3-way tone color switch that… full details here
If you need that KILLER rock organ sound with leslie in a portable package, this is the organ for you. I am only selling because I’m using all software synths now so I’m not using this anymore. Will be shipped in it’s original box with all manuals, accessories, and original… full details here
Vintage Jensen V-21 Horn DriverUsed in Leslie Speakers 122, 142, 145, 147, 251 and othersExcellent condition, very clean, worksShipping to USA 48 states onlyNo international bids or salesNo refunds – item as described… full details here
This kit will connect a 122 series Leslie speaker to a Hammond B-3, C-3 – B-2, C-2 organ. If your organ is wired as it was from the factory with a 5 pin tone cabinet plug , you just plug the kit in and plug the speaker into the kit and… full details here
Rola 15″ 8 OHMS Speaker in almost perfect condition!…see ohm reading 7.6! & pictures..No issues before parted out of PR-20 Hammond Organ Tone Cabinet.
… full details here
Leslie Speaker – Hammond Organ – 6 Pin Cable – 28′
Here is a Hammond/Leslie 6 pin cable 28′ in length.
In good condition.
Shipment methods: USPS Priority Mail
International buyers: Unless shipping is stated, please email for a shipping price, international costs can vary.
International shipment methods: USPS International Priority… full details here
Speakeasy Tap Off Kit DI direct output box for Hammond B3 A100 C3 or Guitar Project
Up for auction is a Speakeasy Tap Off Kit DI direct output box for hammond B3 A100 C3 or Guitar Project. The kit includes a gain knob to control your… full details here
HAMMOND SERVICE MANUAL FOR 810165 GENERAL INFORMATION, PICTURES, SERVICE INFORMATION, SCHEMATICES AND ETC. IT IS A LITTLE WORN BUT EVER THING IS THERE
There are no refunds on shipping
given; any returns will receive money back on the item bought and the buyer
pays for return shipping. I am going… full details here
Hammond Organ B3 Tonewheel Generator w/Scanner & Motors
Here is a tonewheel generator removed from a 1961 Hammond organ.
Scanner, run motor and start motor included.
Same as found in B3, C3, RT3 and A-100
In good working condition.
Shipment methods: UPS Ground
International buyers: Please email… full details here
Two item parted out of PR-20 Hammond Organ Tone Cabinet.Included: REVERBERATION UNIT AO-2358-4 & 12″ G-E Speaker.Both Tested good.
… full details here
HAMMOND B3 C3 A100 ORGAN COLLECTABLE INSTRUCTION MANUAL BOOKS LOT OF 10 All books have some wear but are not missing any pages, please see pictures. I did not see any writing but did not check every page, they should be bought for entertainment only, SOLD AS ISWill ship using… full details here
You are bidding on a used Hammond/Gibbs Reverb Tank for Hammond OrgansThis is a pull from an operational Hammond M-102, circa 1963.
It is in working order.* Can also be used with Hammond A-100 with H-AO-44 or H-AO-35 Reverb Amp. *Input DC resistance is approx. 2 Ohms; Output is approx. 41 Ohmsas measured with my… full details here